Live Pipe Center, Standard Duty
A COMPANION TO ROOFE'S LOW COST HIGH QUALITY MEDIUM DUTY LIVE CENTER IS THE ROOFE STANDARD DUTY PIPE CENTER. MANY OF THE QUALITY FEATURES OF ROOFE'S
OTHER PIPE CENTERS ARE INCORPORATED IN THIS QUALITY, LOW COST CENTER. FOR EXAMPLE, THE SPECIALLY DESIGNED PERMANENT SEAL OF THE REVOLVING "O" RING TYPE IS USED, THE FINEST QUALITY ALLOY STEELS,
QUALITY CONTROLLED HEAT TREATMENT, LONG LIFE BEARINGS, PRECISION MANUFACTURE, AND CLOSE INSPECTION ARE ALL INCORPORATED TO MAKE THIS THE PIPE CENTER TO BUY!
NOMINAL
SIZE | MORSE
TAPER | LOAD
CAPACITY
(LBS) | MEASUREMENTS (INCHES) | | A | B | C | D | E | | SD-BNP-3 | 3 | 2,000 | 2-15/16 | 1/4 | 15/16 | 1-13/16 | 13/16 | | SD-BNP-4 | 4 | 2,500 | 3-15/16 | 5/16 | 15/16 | 2-1/2 | 1-1/16 | | SD-BNP-5 | 5 | 6,000 | 4-7/8 | 1/2 | 15/16 | 3-1/8 | 1-1/4 |
PLEASE SPECIFY: GRADE A, B, OR C. - EXAMPLE (SD-BNP-3A)
60 DEGREE POINT - EXAMPLE (SD-BNP-3A-FS)
IF OTHER THAN MORSE TAPER REQUIRED,PLEASE INDICATE.
LOAD CAPACITY: (THRUST = RADIAL) BASED ON L-10 LIFE FACTOR OF
100 RPM'S FOR 3,800 HOURS.
 |